Two RAID-0 on a Asus A8V Deluxe with a X2 3800+. RAID-0 is 2*Fujitsu MAP3367 36 GB (10.000rpm) on an Adaptec 2100S. RAID-1 is 2*Samsung SP1604N 160 GB (7.200rpm), software-RAID directly on the southbridge. Winbench shows way over 100 MB/s, however, actual transer rates greatly differ, especially when writing on the SCSI-hard drives. As can be seen on the video, even though only the SCSI-controller uses the PCI-bus, transfer rates are rather low. :-(

Autor: Markstar187
Keywords: RAID-0 problem file copying
Agregado: November 30, 2006